Cinema
Theatre
University and Congress Center
Sport and Tribune
Accessories
Home Cinema
Naples
CONSTRUCTION
The seat consists of a steel frame, self-supporting armrests, a seat holder and a backrest holder. The supporting steel frame is a weldment of closed profiles, laser-fired parts, strip steel and sleeves of a turning mechanism. Everything is MIG welded. The supporting frame is made of 5 mm thick steel. The backrest is screwed onto the frame. Seat holder is made of steel. The supporting elements of the whole seat are box-type armrests, connected to the steel frame by countersunk strength screws.
BACKREST
The backrest is fixed or adjustable, upholstered, ergonomically shaped for perfect spine support. It is composed of shaped beech plywood and cold foam. The top layer is an elaborate soft cushion. Optionally, the backrest is mounted in a turning mechanism of the frame. A gas spring allows smooth tilting of the backrest and automatically returns the backrest to its original position when no one is leaning.
SEAT
The fixed seat is fully upholstered, ergonomically shaped. It consists of flat plywood and cold foam. Seat stiffness is influenced by the type of foam. Sandwich combination of two types of foam ensures higher comfort and longer service life. Cold foam density is 40-55 kg/m3. The top layer is an elaborate soft cushion.
ARMRESTS
These are solid self-supporting box-type armrests that also serve as the legs of the seat. They are made of flat plywood, coated with foam and upholstered. The top part is covered with high-density cold foam in the hand area for durability. The adjustable variant has a recessed button on the inside, top or front of the right armrest that controls the gas spring mechanism.
HEADREST
A distinctive feature is the large headrest. Extension and tilt are mechanically adjustable. A maximum of 5 cm can be extended above the backrest. The adjustment is easy, the mechanism does not generate much resistance and it runs quietly. An extra layer of padding in the form of a soft cushion is placed on the surface of the front side of the headrest.
COVER
The upholstered parts (backrest, seat, armrests) could be covered with: Fabric 100 % polyester with increased durability designed for public spaces (abrasion resistance 50 000 or 100 000 cycles according to the Martindale scale), leather, leatherette or combination. Type, design and color – up to a client/according to the sampler.
SURFACE FINISH
Metal parts are powder coated (KOMAXIT) according to the RAL scale (standard black powder coating 9005).
ANCHORING
Four screws or anchors according to the type of floor (flat floor, sloping floor or steps). Arrangement method: in straight line or in the arc.
DIMENSIONS (mm)
(A) HEIGHT: 1000-1100
(B) WIDTH: 650-750
(C) DEPTH: 820-1020
(D) WIDTH OF ARMREST: 120-150
Standard: A-1040, B-680, C-840, D-150
